Clutch Pack Kits for BAKER clutches
BAKER Clutch Pack Replacement Kits contain all necessary fiber and steel plates to restore like new performance to your BAKER clutch. These are original equipment plates which will yield proper stack height and trouble free operation.
The most critical part of installing new clutch plates is getting the clutch stack height right. If the stack height is short, your new clutch will slip. To get the right stack height we sort through hundreds of plates and dimensionally select the right combination of plates to yield the right stack height. Final height check is verified ( /-.005”) on granite plate with a height guage and a 50 lb cylindrical weight sitting on top of the stack to simulate the pressure plate load.
9-Plate Clutch Stack for Big Dog 2005-2010
OEM replacement 9-plate clutch stack, pre-measured to a height of 1.960″, fits Big Dog models from 2005-2010. A replacement clutch stack can be used as a direct replacement for both existing 9-plate and 12-plate clutch configurations. If switching from a 12-plate stack to a 9-plate stack, you must also update the inner and outer ball and ramp assembly located in the pulley cover, for more information, please contact the BAKER Drivetrain tech department.
12-Plate Clutch Stack for Big Dog 2005-2010
OEM replacement 12-plate clutch stack, pre-measured to a height of 1.970″, fits Big Dog models from 2005-2010
BAKER King Kong Clutch
The King Kong ring gear basket design and friction plates dwarfs the stock clutch components. Look at the frictions plates shown to the right, by increasing the diameter of the friction plate we are able to increase the torque handling capacity. The KKC come with 20 of these massive single-sided friction plates. Being single-sided friction plates the KKC dissipates heat more quickly than a standard 2-sided friction plate, the end result being a longer-lasting, durable clutch.
BAKER 9-Plate Street Clutch
9 kevlar 2-sided clutch plates with large radius
BAKER Synchronous Belt Drive Clutch
11 plate clutch pack holds up to 120 ft-lbs of continuous use while the tight tolerance clutch basket all but eliminates the 'neutral clutch rattle' most belt drives suffer from.
Features
- Proper stack height
- BAKER OEM plates
- Replacement clutch plates made from the highest quality fiber and steel
Fitment
- BAKER 9-Plate Street Clutch
- BAKER King Kong Clutch
- BAKER Synchonous Belt Drive Clutch
- 2005-2010 Big Dog (By BAKER)
Please refer to our Sprocket/Chain Matrix in order to find the correct pitch chain for your setup.
Part Numbers
CPRK-BDM | Big Dog 9-Plate Clutch Pack, 2005-2010 |
CPRK-KKC | BAKER King Kong Clutch Pack |
CPRK-9P | BAKER 9-Plate Street Performance Clutch Pack |
CPRK-SBD | BAKER Synchronous Belt Drive Clutch Pack / BAKER Big Dog Belt Drive Clutch Pack |
Detail
Listed in the options (above) as you buy:
Other Upgrades:
- Fine Tooth Chain Adjuster (PN FTA-A)